Features:

• 2 HP spindle motor.
  
• Front mount spindle with run-out within 0.00008".
  
• Table overall flatness within 0.00012".
  
• Wheel guard with capacity for 8" wheel.
  
• Longitudinal table stroke is 20".
  
• Continuous loop-cog timing belt system.
  
• Crossfeed lock.
  
• Adjustable longitudinal table stops.
  
• Meehanite casted saddle with Double-V Turcite ways.
  
• Safety 24 volt circuit control.
  
• Push button manual starter with overload protection.
  
• Distance between Double-V is 19.6" apart.
  
• The width of machine base is 22".
  
• FC 25 machine base weighs more than 1,584 lbs.
  
• Maximum work load at 320 lbs.